About this user manual, Introduction, Conventions used – Seiwa Tigershark Plus User Manual

Page 9: How this user manual is organized

Advertising
background image

11

User Manual

About this User Manual

INTRODUCTION

The chart plotter is a state-of-the-art computerized electronic chart system, de-

signed as a sophisticated navigation aid. User friendly operations make the chart

plotter easy to operate. All calculations and information necessary for the naviga-

tion are performed and displayed on the screen quickly and accurately providing

all of the facilities of a conventional GPS but with the added benefit of a powerful

electronic chart display. The cartographic information is obtained from C-MAP C-

CARD (cartography data cards) that are available through your local dealer. For

additional information on C-MAP Cartography visit web site at www.c-map.com.

CONVENTIONS USED

Throughout this User Manual, the labelled keys are shown in capital letters en-

closed in square brackets, for example [ENTER]; the software keys are shown in

small capital letters enclosed in square brackets, for example [E

DIT

].

Menu operations are in bold characters listed by keys sequence with the menu

names enclosed between inverted commas, for example [MENU] + "MAP" +

[ENTER] means: press the [MENU] key, using the cursor key select the Map

menu and then press [ENTER].

Any menu operation and function activation in this User Manual is related to all

color chart plotter models. Whenever needed, a note has been added for other

different models.

HOW THIS USER MANUAL IS ORGANIZED

CHAPTER 1: Getting Started

Overview of the controls and how to start using the chart plotter.

CHAPTER 2: Operations

Description of the operation procedures of the chart plotter in detail.

CHAPTER 3: User Setting Up

Set up of the chart plotter, the charting preferences and the GPS options.

CHAPTER 4: C-LINK

C-Link system is a feature needed to share the same cartographic data

between two chart plotter units linked via serial I/O port.

CHAPTER 5: C-LINK NAVIGATION DATA TRANSFER

This function allows transferring C-LINK navigation data (hereinafter

“C-LINK navigation data”) between two chart plotters linked through

the C-LINK system.

CHAPTER 6: GPS

GPS antenna and set up of the hardware configuration.

CHAPTER 7: Maintenance

User maintenance guidelines.

Terms

List of the terms and abbreviations used in the User Manual.

MURENA/MURENA iGPS

Introduction to the basic information on MURENA/MURENA iGPS chart

plotter, its features and use. Installation of the chart plotter.

Advertising
This manual is related to the following products: