Lenovo ThinkStation P300 - Manual (Page 100)

Figure 33. Pivoting the drive bay assembly upward
5. If you are installing a new optical drive, do the following:
a. Remove the metal static shield from the bay.
b. Locate the optical drive retainer from the left side of the computer. Push the optical drive retainer
downwards to unlock the retainer. Then lift the optical drive retainer out of the chassis.
If you are replacing an optical drive, do the following:
a. Disconnectallcables from the rear of the optical drive.
b. Press the optical drive lock 1 on the right side of the drive bay assembly and slide the optical drive
out of the rear of the bay. Then remove the optical drive retainer from the left side of the optical drive.
88 ThinkStation P300 User Guide