Lenovo ThinkStation P300 - Manual (Page 95)

7. Install the two screws to secure the mSATA solid-state drive to the storage converter.
Figure 24. Installing the screws that secure the mSATA solid-state drive
8. Insert the mSATA solid-state drive storage converter to the chassis and push the converter to the left to
align the screw hole in the converter with the corresponding hole in the chassis. Then install the screw
to secure the mSATA solid-state drive storage converter to the chassis.
Figure 25. Installing the mSATA solid-state drive
9. Connect the signal cable and the power cable to the mSATA solid-state drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 123.
Chapter 9 . Installing or replacing hardware 83