Lenovo ThinkStation P300 User Manual
Page 103
1. Install the solid-state drive into the storage converter. Then, install the four screws to secure the
solid-state drive to the storage converter.
Figure 37. Installing the solid-state drive into the storage converter
2. To install the solid-state drive with the storage converter into the 3.5-inch hard disk drive bracket, flex
the bracket and align pin
1
, pin
2
, pin
3
, and pin
4
on the bracket with the corresponding holes in
the storage converter.
Figure 38. Installing the storage converter together with the solid-state drive into the hard disk drive bracket
3. Install the storage converter with the bracket into the desired hard-disk-drive bay. See “Replacing the
primary hard disk drive” on page 106 or “Replacing the secondary hard disk drive” on page 108.
4. Connect the signal cable and the power cable to the solid-state drive.
Installing or replacing hardware
91