Lenovo ThinkStation P300 - Manual (Page 136)

5. Position the computer cover on the chassis so that the rail guides on the bottom of the computer
cover engage the rails on the chassis. Then, push the cover to the front of the computer until it snaps
into position.
3
4
5
6
7
8
/
Figure 86. Reinstalling the computer cover
6. Install the screws to secure the computer cover.
7. If there is any locking device available, lock the computer cover. See Chapter 4 “Security” on page 31.
8. Reconnect the external cables and power cords to the computer. See “Locating connectors on the rear
of your computer” on page 3.
9. To update your configuration, refer to “Using the Setup Utility program” on page 37.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit
(CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Obtaining device drivers
You can obtain device drivers that are not preinstalled in your operating system at
http://www.lenovo.com/support. Installation instructions are provided in readme files with the device-driver
files.
124 ThinkStation P300 User Guide