Lenovo ThinkStation P300 - Manual (Page 107)

Figure 43. Pivoting the drive bay assembly upward
6. Disconnect the front audio and USB assembly cables from the system board. See “Locating parts on
the system board” on page 6.
Note: Ensure that you note the locations of the cables when you disconnect the cables from the
system board.
7. Remove the screw that secures the front audio and USB assembly bracket to the chassis to remove
the bracket from the chassis.
Figure 44. Removing the front audio and USB assembly
8. Remove the two screws that secure the front audio and USB assembly to its bracket and remove the
failing front audio and USB assembly from the bracket.
Chapter 9 . Installing or replacing hardware 95