Lenovo ThinkStation P300 - Manual (Page 87)

1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 74.
3. Remove the front bezel by releasing the three plastic tabs on the top of the front bezel and pivoting the
front bezel outward to remove it from the computer.
Figure 12. Removing the front bezel
4. To reinstall the front bezel, align the three plastic tabs on the top of the front bezel with the corresponding
holes in the chassis, then pivot the front bezel inward until it snaps into position.
Figure 13. Reinstalling the front bezel
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 123.
Chapter 9 . Installing or replacing hardware 75