Lenovo ThinkStation P300 - Manual (Page 122)

Figure 63. Removing the cable clip
8. Align the four holes in the secondary hard disk drive bracket with the corresponding four tabs on the
bottom of the primary hard disk drive bay as shown. Then, position the bracket onto the bottom of the
primary hard disk drive bay so that the tabs on the bay pass through the holes in the bracket.
Figure 64. Positioning the bracket onto the bottom of the primary hard disk drive bay
9. Slide the secondary hard disk drive bracket to the left of the chassis until it snaps into position and the
screw hole 1 in the bracket is aligned with the screw hole in the bay 2 .
110 ThinkStation P300 User Guide