Installing or removing the sd module – Lenovo ThinkServer RD550 User Manual
Page 98
5. Remove any parts or disconnect any cables that might impede your operation.
6. Touch the static-protective package that contains the flash module to any unpainted surface on the
outside of the server. Then, take the flash module out of the package.
7. Press the two release tabs
1
and grasp the flash module by its edge at the same time. Then, lift the
flash module straight up and off the AnyRAID adapter. If necessary, you can remove the AnyRAID
adapter first before removing the flash module. Then, reinstall the AnyRAID adapter. See “Replacing the
AnyRAID adapter or the pass-through board” on page 99.
Figure 49. Removing the flash module
8. Reinstall any parts or reconnect any cables that you have removed.
9. If you are instructed to return the old flash module, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 144.
Installing or removing the SD module
If you equip your server with an SD module, you can install up to two SD cards into the SD module for data
storage. You can purchase an SD module and SD cards from Lenovo.
For a list of ThinkServer options, go to:
Installing the SD module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 61.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the SD module and follow those instructions in addition to
the instructions in this topic.
To install the SD module, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 63.
84
ThinkServer RD550 User Guide and Hardware Maintenance Manual