APPLIED ENGINEERING Vulcan - Manual (Page 18)

Attach Riser Plates (][ Plus Only)
7 ) Insert Vulcan
With the computer still on its side, turn the Vulcan at an angle
and insert it into the opening left by the old supply.
• If Plus Note: Some speakers will be in the way, others
will not. If you need to move the speaker, pry it up (it is
glued not screwed) and use the included adhesive strip
to reattach it in an out of the way part of the case.
Insert Vulcan
8 ) Use four screws provided to secure Vulcan.
Align the holes on the bottom of the Vulcan and the computer
case. Do not use the screws from the old power supply. Do not
over-tighten the screws.
Oh. 2 - //e and ][ Plus Installation 11