Restore individual files – APPLIED ENGINEERING Vulcan User Manual
Page 47
1)
Run Backup II.
2)
Insert the disk from which you want a listing into the
proper floppy drive.
3)
From Backup H’s main menu, press the R key on your
keyboard. This selects the RESTORE FILES option.
B — BACKUP FILES
R — RESTORE FILES
Q — QUIT
PLEASE SELECT AN OPTION
4)
Press L to select LIST FILES.
V - RESTORE VOLUME
P -
RESTORE BY PATHNAME
L - LIST FILES
SELECT AN OPTION OR <ESC>:
5)
At the LIST... prompt, type in the slot number of your
floppy drive (usually “5” for 3.5” and “6” for 5.25”).
6)
Now type in the drive number of your floppy drive
(usually 1, however, the 3.5” drive number will be 2 if
you’re booting from a RamKeeper).
LSIT THE TABLE OF CONTENTS FROM
—-
(SLOT 5
DRIVE 1)
7)
Select where to output the list;
◊
Press <return> to send the list to the screen only
◊
Press P-<return> to send the list to the printer and
screen if you have a printer connected.
Restore Individual Files
If a particular file or group of files gets corrupted, lost, stolen, etc.,
you can restore that file or group from a backup by doing the
following:
*
Note: If you’re restoring a file or folder that already
exists, the existing file or folder will be replaced by the
restored version.
1)
Run Backup II.
2)
Insert the disk containing the file you’ll be restoring into
the proper floppy drive.
40
Vulcan