APPLIED ENGINEERING Vulcan - Manual (Page 25)

From Basic
From BASIC, set your current prefix to the VULCAN disk and
enter -PART.MANAGER at the BASIC prompt.
From the Finder (GS and lIe retrofit Only)
1) With your 3.5” drive set as the startup device, insert
your Vulcan 3.5” disk into it and boot your computer.
2) Double-dick the disk icon to open its window.
3) Double-click the icon PART MANAGER to run the application.
Other Launchers
Follow the instructions for the launcher you use to run the
application
PART MANAGER.
Once the program is run, you’ll see the current partition settings.
A sample screen is shown below:
AE VULCAN PARTITION MANAGER (V x.x)
MODIFY FORMAT PRINT QUIT
LOCK NAME SIZE ON SYSTEM
1
AE.1 32767.5K * PRODOS BOOT
2 AE.2 9460.0K * PRODOS •
3 .0K CLEAR
4 .0K CLEAR
5 .0K CLEAR
6 .0K CLEAR
7 .0K CLEAR
...
The PM Menu
The MODIFY Mode
While in modify mode you can enter the partition manager
options table to configure your hard drive into different
partitions or segments.
Entering MODIFY Mode
Use the left and right arrow keys (or J and K keys) to select
MODIFY from the top menu bar then press <return>.
18 Vulcan