Konica Minolta bizhub 161f - Manual (Page 164)

7.3 Setting Up the Paper Sources 7
bizhub 161f 7-17
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
✎
Tip
Pressing the [ ] and [ Ö ] keys moves “ ” to select the paper size.
To return to the previous message, press the [No/C] key.
5 Using the 10-Key Pad, enter the
width (X) of the loaded paper.
❍ To clear the entered value,
press the [No/C] key.
✎
Note
The paper width can range
from 90 mm (3-1/2) to 216 mm
(8-1/2).
When entering the paper size,
refer to the diagram on the
right side of the screen to
check which sides of the paper
are the width and the length.
✎
Tip
Enter the value by mm using
the 10-Key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
6 Press the [Yes] key.
Ц
90-216