Konica Minolta bizhub 161f - Manual (Page 27)

1 1.2 Regulation Notices
1-14 bizhub 161f
Int
ro
duc
tio
n
Chap
ter
1
For New Zealand Users:
The grant of a Telepermit for any item of terminal equipment indicates only that
Telecom has accepted that the item complies with minimum conditions for
connection to its network. It indicates no endorsement of the product by Telecom,
nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment
of a different make or model, nor does it imply that any product is compatible with
all of Telecom’s network services.
This equipment is not capable, under all operating conditions, of correct operation
at the higher speeds for which it is designed. Telecom will accept no responsibility
should difficulties arise in such circumstances.
This equipment shall not be set to make automatic calls to the Telecom ‘111’
Emergency Service.
The call log incorporated in this equipment does not record all answered calls. The
call log, therefore may not agree with the Telecom account which may include calls
not shown on the log.
This equipment should not be used under any circumstances which may constitute
a nuisance to other Telecom customers.
Not all telephones will respond to incoming ringing when connected to the
extension socket.
This device is equipped with pulse dialling while the Telecom standard is DTMF
tone dialling. There is no guarantee that Telecom lines will always continue to
support pulse dialling.
Use of pulse dialling, when this equipment is connected to the same line as other
equipment, may give rise to bell tinkle or noise and may also cause a false answer
condition. Should such problems occur, the user should NOT contact the Telecom
Faults Service.
The Reception Operation - No. of Rings? setting must be configured between 3 and 10.
Laser Safety
This is a digital machine which operates using a laser. There is no possibility of
danger from the laser provided the machine is operated according to the
instructions in this manual.
Since radiation emitted by the laser is completely confined within a protective
housing, the laser beam cannot escape from the machine during any phase of user
operation.
This machine is certified as a Class 1 laser product. In other words, the machine
does not produce hazardous laser radiation.