ADC MM701G - Manual (Page 107)

MM701G and MM702G User Manual 99
A
A
CCESSING THE
C
OMMAND
-L
INE
I
NTERFACE
You can manage the modem using either the command-line interface or the Web interface.
Access to the command-line interface is accomplished by either direct connection to the modem
console port or through a telnet session (over a network). This section provides instructions for
accessing and using the command-line interface. Access to the Web interface is accomplished
through a Web browser using an internet connection.
Chapter 2 , “Accessing the Web Interface
for Modem Management” provides instructions on accessing and using the Web interface for
management.
The Web interface is the more comprehensive of the two management interfaces and generally
simpler to use. There are situations, however, in which using the command-line interface is
preferred over the Web interface. For example, if you cannot connect to the modem through the
DSL line and 10Base-T port, you can still manage the modem through the console port.
The following sections describe how to use the command-line interface:
Section Page
Connect to the Console Port 100
Access through a Telnet Session 103
Manage WAN Sessions 106
Manage DSL 118
Restoring Factory Defaults 130
Saving the Current Configuration 131
Updating System Software 132
Viewing System Information 133
Rebooting the Modem 134