ADC MM701G - Manual (Page 3)

About This User Manual
MM701G and MM702G User Manual iii
A
BOUT
T
HIS
U
SER
M
ANUAL
Use this manual to install, configure, and manage the ADC ® Megabit Modem ® MM701G and
MM702G. These modems can be used in two types of applications:
• as an endpoint (CPE) to a DSLAM for Internet and other broadband connection through a
service provider
• as a LAN extension by implementing a point-to-point connection with another modem of
the same model (MM701G to MM701G or MM702G to MM702G)
To complete an endpoint installation for an MM701G or MM702G modem, follow the
configuration instructions in all chapters of this manual, with the exception of Chapter 7,
“Implementing a Point-to-Point LAN Extension.”
To complete a point-to-point installation for two MM701G or two MM702G modems, follow
the configuration instructions in these chapters only:
• Chapter 1, “Installing the Modem”
• Chapter 2, “Accessing the Web Interface for Modem Management”
• Chapter 5, “Configuring System Parameters”
• Chapter 7, “Implementing a Point-to-Point LAN Extension”
• Chapter 8, “Configuring Modem Security”
After configuring the modem(s) for your application, monitor its status and perform other
management functions using the instructions in
Chapter 9 , “Managing the Modem.” If you
choose to manage the modem through the console port, use the instructions in Appendix A ,
“Accessing the Command-Line Interface.”