Wan interface – ADC MM701G User Manual
Page 150
Hardware Specifications
142
MM701G and MM702G User Manual
WAN Interface
G.shdsl (Symmetrical High-Speed Digital Subscriber Line)
Maximum transmission rate:
Downstream
Upstream
2304 kbps for single-pair; 4608 kbps for two-pair
2304 kbps for single-pair; 4608 kbps for two-pair
Minimum transmission rate to sync 192 kbps for MM701G
384 kbps for MM702G
Connector
RJ-11
ATM (Asynchronous Transfer Mode)
ATM Adaptation Layer
AAL5 (ITU I.363.5)—Supports encapsulation and
de-encapsulation of AAL5 Protocol Data Units (PDUs) for
convergence. Segmentation and Reassembly (SAR) layer
segments and reassembles AAL5 PDUs into ATM cells that are
48 byte SAR-PDUs.
ATM Layer
Attaches or strips the 5-byte header to the 48-byte SAR-PDU.
Cell Format
Format complies with ITU I.361 ATM cell format. Cell delineation
complies with ITU I.432 Cell Delineation and HEC. Cells are fixed
length (53 bytes), including 5 bytes of header and 48 bytes of
payload. Included in the header are the VPI and VCI number.
Virtual Circuit type
Permanent Virtual Circuit (PVC) per ATM forum UNI Version 3.1.
Maximum Virtual Circuits
32 virtual circuits that can simultaneously connect to service
providers for sessions encapsulated either as PPP or RFC 1483
Bridging/Routing.