Configure the centraloffice lan – ADC MM701G User Manual
Page 82
Complete a Custom Configuration
74
MM701G and MM702G User Manual
Configure the Central-Office LAN
1
Select
LAN
on the menu bar, then select
LAN Setup
under
LAN Options]
to access the
LAN
Configuration
page.
2
In the
LAN Protocol
box, confirm that the protocol is set to
Bridged
. If the protocol is not set
to bridged, it can be changed only through the command-line interface. See
,
“Accessing the Command-Line Interface”
for procedures on using this interface to change
the LAN protocol.
3
In the
IP Address
box, enter an available IP address on your subnet.
4
Click
Apply
.
Any device (such as a PC) connecting to the modem LAN interface loses its
connection when the modem LAN IP address is changed. After the IP address
is changed, you need to specify this new address in the Web browser to
reconnect a device.