Client). see – ADC MM701G User Manual
Page 27
Chapter 3: Configuring the LAN
MM701G and MM702G User Manual
19
2
Select one of the following three DHCP server modes as indicated by your LAN
administrator, then click
Configure
:
•
Disabled
—
DHCP server mode
is not enabled. If you do not enable DHCP server for the
modem, you must enter a default gateway for each client on your LAN (such as PCs)
and also an IP address for a DNS server. Either the service provider or your LAN
administrator will provide you these IP addresses to enter in the Internet Protocol
(TCP/IP) setup for your PC (or other LAN clients). See
for information about how to access this dialog. The following is an example
of the dialog and fields that must be filled in (example is from Windows 2000; the
dialog for other operating systems may be slightly different).
DHCP default gateway
IP address
DNS server IP address
Set Internet protocol to: Use
the following IP address: