Connector pinouts, Dsl port (rj-11) – ADC MM701G User Manual
Page 151
Appendix B: Specifications
MM701G and MM702G User Manual
143
Connector Pinouts
The following sections provide the pinout information for the various modem connectors.
DSL Port (RJ-11)
The following table shows the signal on each pin of the DSL port for a 2-wire G.shdsl
application. The connector for this interface is an RJ-11. The modem accommodates Tip and
Ring reversal on this one loop. See
for the location of this port.
The following table shows the signal on each pin of the DSL port for a 4-wire G.shdsl
application. The connector for this interface is an RJ-11. The modem accommodates Tip and
Ring reversal on each separate Loop A and Loop B. See
for the
location of this port.
Pin
Signal
1
Not used
2
No connection
3
Tip (Loop A)
4
Ring (Loop A)
5
No connection
6
Not used
Pin
Signal
1
Not used
2
Tip (Loop B)
3
Tip (Loop A)
4
Ring (Loop A)
5
Ring (Loop B)
6
Not used