ADC MM701G - Manual (Page 21)

MM701G and MM702G User Manual 13
3
C
ONFIGURING THE
LAN
The LAN configuration sets up the interface between the modem 10Base-T LAN port and
devices on the LAN. The LAN is managed by your network administrator, who will make the
decisions concerning its topology.
For instructions on setting up the LAN interface for a point-to-point modem application, go to
Chapter 7, “Implementing a Point-to-Point LAN Extension.”
B
EFORE
Y
OU
B
EGIN
. . .
Your network administrator will:
❑ Determine if you will use the modem Ethernet port in full- or half-duplex mode.
❑ Identify a subnet value, including IP addresses and subnet masks.
❑ Determine if DHCP for the modem is enabled. If it is enabled, determine if the modem will
be configured as a:
– DHCP client which receives an IP address from another device that is a DHCP server
on the LAN
– DHCP server (determine the range of IP addresses the modem will need to serve, and
identify the DHCP gateway and DNS server)
– DHCP relay agent (determine the IP address to which the DHCP functions will be
relayed)
❑ Determine if DNS Relay mode for the modem is enabled. If it is, identify the IP address for
the DNS server.