ADC MM701G - Manual (Page 61)

Chapter 5: Configuring System Parameters
MM701G and MM702G User Manual 53
S
AVING
C
HANGES
Use the Save Changes page for saving your current configuration to
flash memory. This option immediately writes all current system
configuration to permanent memory (NVRAM). You cannot selectively write configuration to
NVRAM. When you issue the save command, all current configuration is written to NVRAM.
1 Select Save Changes on the menu bar to access the Save Changes page.
When saving the modem configuration, do not power off the modem while the
save is in process.
Save Changes