Verify connectivity, Erify, Onnectivity – ADC MM701G User Manual
Page 84
Verify Connectivity
76
MM701G and MM702G User Manual
V
ERIFY
C
ONNECTIVITY
After you have performed each of the previous configuration changes, verify back-to-back
communication by passing traffic over the WAN session. For example, set up a PC on the
LAN-side of the Remote modem and another PC on the LAN-side of the Central-Office modem.
Then, transfer a file or ping between the two PCs. This generates traffic and tests connectivity.
1
On the front panel of one of the modems, check the status of the SYNC LED. If it is
blinking, it is attempting to establish communication with the other modem. If it is on solid
green, it has already synchronized its connection with the other modem. See
for further definitions of LEDs indications.
2
Select
System
on the menu bar, then select
ATM Statistics
under
[Status]
to access the
ATM
Statistics
page.
3
View the statistics. If the RX Cell and TX Cell values increment, the two modems have
established communication and are passing traffic. If they do not, refresh the page by
clicking the
Refresh
button on your Web browser. If the counters still do not increment,
verify each modem for the correct configuration parameters.