Installing the modem, Step 1— unpack the modem, Chapter 1, “installing the modem – ADC MM701G User Manual
Page 9: Chapter 1: installing the modem, Unpack the modem, Nstalling, Odem
MM701G and MM702G User Manual
1
1
I
NSTALLING
THE
M
ODEM
The MM701G and MM702G are versatile, high-speed modems that connect an Ethernet LAN
to one or more service providers using G.shdsl transmission technology. The connections
provide instant and high-speed broadband access to the Internet or to other types of Wide Area
Networks (WANs). The MM701G and MM702G provide:
•
configuration either as a point-to-point LAN extension or as an end-connection to a
DSLAM (see page iii for the process you must follow to complete either installation)
•
larger packet sizes to accommodate VLAN traffic
•
32 simultaneous Bridge/Router or PPP sessions to the same or different service providers
over the WAN interface
•
protocols and services such as DHCP server, DNS Relay, NAT, and RIP
•
capability to download pre-defined configuration files to the modem flash memory instead
of manually defining each and every value for a modem
S
TEP
1—U
NPACK
THE
M
ODEM
If you store the modem for a long period of time, use the original antistatic bag and packaging.
Observe environmental specifications provided in Appendix B.
1
Remove the modem from the packaging.
2
Visually inspect the container for signs of
damage. If the equipment was damaged in
transit, report the damage to the transportation
company and to the sales representative.
3
Check the contents of the package for:
•
6 Vdc power supply with cord
•
black Cat. 5 cable for Ethernet connection
•
silver cord for DSL connection
•
flat cable (gray) and DB-9 port adapter for
console port connection
CO
L
SY
NC
PW
R
TX
RX
MA
R
LIN
K
RX
TX
M0151-A