Olympus E-3 - Manual (Page 103)

103
EN
C
us
tom
iz
ing y
o
ur
cam
er
a
8
Custom Menu 1e EXP / e / ISO
EV STEP
You can select the EV step for exposure parameter setting, such as shutter speed, aperture
value, or exposure compensation value, from [1/3 EV], [1/2 EV], or [1 EV].
ISO STEP
You can select the EV step of the ISO sensitivity from [1/3 EV] or [1 EV].
ISO-AUTO SET
You can set the upper limit and default ISO values when ISO is set to [AUTO].
[HIGH LIMIT]
This sets the upper limit of the ISO value that automatically changes. The upper limit
can be set from 100 to 3200 in 1/3 EV increments.
[DEFAULT]
This sets the value to be normally used when the optimum exposure can be obtained.
The value can be set from 100 to 3200 in 1/3 EV increments.
ISO-AUTO
You can set the shooting mode in which the ISO [AUTO] setting is activated.
[P / A / S]
In P / A / S mode, the [AUTO] setting is activated. When [AUTO] is set in other
shooting modes, ISO 100 is set.
[ALL]
The [AUTO] setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in M mode.
AEL Metering
You can set the metering mode when pressing the AEL / AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1f # CUSTOM
#X-SYNC.
You can set the shutter speed that will be used when the flash fires. The speed can be set from
1/60 to 1/250 in 1/3 EV increments.
• For details on the synchronization speed of commercially available flashes, refer to their manuals.
#SLOW LIMIT
You can set the slow limit of the shutter speed that will be used when the flash fires. The speed
can be set from 1/30 to 1/250 in 1/3 EV increments.
w+F
When set to [ON], it will be added to the exposure compensation value and flash intensity
control will be performed.