Olympus E-3 - Manual (Page 40)

40
EN
3
Exposure
3
Exposure
The camera sets the optimum aperture value and shutter speed automatically according to the
subject brightness.
• When the shutter button is half-pressed, the shutter speed and
aperture value are displayed on the viewfinder and control panel.
Program shift ( %)
By turning the main dial (or sub dial) in the P mode, you can
change the combination of aperture and shutter speed while
maintaining the optimum exposure.
g“Program line
diagram (P mode)” (P. 136)
• The program shift setting will not be canceled after shooting. To
cancel program shift setting, turn the main dial (or sub dial) until
the shooting mode indication
% on the viewfinder or control panel changes to P or turn off the
power.
• Program shift is not available when you are using a flash.
The shutter speed and aperture value are blinking:
j The optimum exposure cannot be obtained. For details, see “Exposure warning
display” ( gP. 137).
When you want to change the shooting mode using only your right hand:
j You can change the shooting mode using the < button and dials. g“; FUNCTION” (P. 99)
Program shooting
Direct button MODE + j[P]
 TIPS
j
MODE button
AF confirmation mark
Shooting mode
Shutter speed
Aperture value
Control panel
Viewfinder
Viewfinder
Program shift