Olympus E-3 - Manual (Page 78)

78
EN
6
F
lash shooti
n
g
1
Press the # UP button to raise the built-in
flash.
2
Press the shutter button halfway.
• The # (flash stand-by) mark lights when the
flash is ready to fire. If the mark is blinking, the
flash is charging. Wait until charging is complete.
3
Press the shutter button all the way.
To shoot without having to wait for the flash to finish charging:
j See “RLS PRIORITY S / RLS PRIORITY C” (gP. 101).
x
Notes
• Depending on the distance to the subject or the lens being used, the light emitted by the flash
may produce a vignette effect. g“Vignetting of the built-in flash when using an
interchangeable lens” (P. 138)
Built-in flash shooting
 TIPS
#UP button
Viewfinder
Flash stand-by mark