Olympus E-3 - Manual (Page 95)

95
EN
Pl
ayba
ck fun
cti
o
n
s
7
Erasing selected frames
This function lets you erase selected images at one time
during single-frame playback or index display.
1
Display the images you want to erase and press the
i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the
i button again.
• During index display, press p to select the images you
want to erase and press the i button.
2
Press p to display the next images you want to
erase and press the i button.
3
After you have selected the images to erase, press
the
S button.
4
Use ac to select [YES], then press the i button.
All-frame erase
1
MENU  [ W][CARD SETUP]
2
Use ac to select [ALL ERASE], then press the
i button.
3
Use ac to select [YES], then press the i
button.
• All frames will be erased.
To erase immediately:
j If you have set “QUICK ERASE” (gP. 105) to [ON],
pressing the S button will erase an image immediately.
j You can set the initial position of the cursor to [YES].
g“PRIORITY SET” (P. 106)
 TIPS
ERASE SELECTED
YES
NO
BOTH RAW&JPEG ARE ERASED
CANCEL SELECT GO
ALL ERASE
FORMAT
CARD SETUP
CANCEL SELECT GO
YES
NO
ALL ERASE
CANCEL SELECT GO