Olympus E-3 - Manual (Page 60)

60
EN
4
Focusing
an
d shooti
ng functio
n
s
Setting display
This function lets you take pictures using the self-timer. You can set the camera to release the
shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting.
For the setting method, see “Sequential shooting” (
gP. 59).
Press the shutter button all the way.
• A picture is taken.
• When
Y12s is selected:
First, the self-timer lamp lights up for approximately 10
seconds, then it blinks for approximately 2 seconds and the
picture is taken.
• When Y2s is selected:
The self-timer lamp blinks for approximately 2 seconds, and
then the picture is taken.
• To cancel the activated self-timer, press the < / Y / j button.
x
Notes
• Do not press the shutter button while standing in front of
the camera; this could result in the subject being out of
focus since focusing is performed when the shutter button
is pressed halfway.
Viewfinder Control panel
Sequential shooting H :
Sequential shooting L :
12-second self-timer :
2-second self-timer :
Remote control :
2-second remote control :
• Anti-shock display:
A blinking display in the viewfinder or on the control panel and the D symbol on the super
control panel indicates that anti-shock is activated.
Self-timer shooting
Single-frame shooting
Self-timer lamp