Olympus E-3 - Manual (Page 91)

91
EN
Pl
ayba
ck fun
cti
o
n
s
7
Recorded images can be edited and saved as new images. Available editing functions depend
on the image format (image record mode).
A JPEG file can be printed as is without modification. A RAW file, on the other hand cannot be
printed as is. To print a RAW file, use the RAW edit function to convert the RAW data format to
JPEG.
Editing images recorded in RAW data format
The camera performs image processing (such as white balance and sharpness adjustment) on
images in the RAW data format, then saves the data to a new file in the JPEG format. While
checking recorded images, you can edit them to your liking.
Image processing is performed based on the current camera settings. Change the
camera settings to suit your preferences before editing.
Editing images recorded in JPEG data format
[
Q] Converts the image file size to 1280 x 960, 640 x 480 or 320 x 240.
[SHADOW ADJ] Brightens a dark backlit subject.
1
MENU  [ q][EDIT]
2
Use bd to select an image, then press the i
button.
• The camera recognizes the image data format.
• For images recorded in RAW+JPEG, a selection screen
will appear, asking you which data to edit.
3
The setting screen varies with the image data
format. Select the item you want to edit and do the
following steps.
• The edited image is saved as another image, apart from the original image.
• To exit the edit mode, press the
MENU button.
x
Notes
• Editing of a JPEG image is not possible in the following cases:
When an image is recorded in RAW, when an image is processed on a PC, when there is not
enough space in the card memory, when an image is recorded on another camera.
• When resizing ([ Q]) an image, you cannot select a larger number of pixels than was originally
recorded.
Editing still images
CANCEL SELECT GO
Confirm the data format from here.
JPEG EDIT
SHADOW ADJ
CANCEL SELECT GO
RAW DATA EDIT
YES
NO
CANCEL SELECT GO