Pioneer AVIC-HD3 - Manual (Page 104)

102
Ch
ap
te
r
10
U
si
n
g
t
h
e AV
S
ou
rc
e (B
ui
lt
-i
n DV
D
Dri
ve a
n
d
R
ad
io
)
AV
1
Display the radio text you want to store in
memory.
➲
“Displaying radio text” ➞ Page 101
2
Press and hold any of the keys 1 – 6 to
store the displayed radio text.
The selected radio text is stored in memory.
The next time you press the same keys 1 – 6 in
the radio text display, the stored text is
recalled from memory.
❒
If the radio text data already stored under
memory 1 – 6, the radio text memorised
afterward will overwrite the existing one.
Searching for an RDS station by
PTY information
You can search for general types of broadcasting
programmes.
➲ “PTY list” ➞ Page 105
1
Touch [PTY].
2
Touch or to select a
desired programme type.
There are four programme types:
[News&Inf] – [Popular] – [Classic] – [Oth-
ers]
3
Touch [Search] to begin the search.
The tuner searches for a station broadcasting
that programme type.
To cancel the search, touch [Stop].
❒
The programme of some stations may dif-
fer from that indicated by the transmitted
PTY.
❒ If no station is broadcasting the type of
programme you searched for, [Not
Found] is displayed and then the tuner
returns to the original station.
Receiving traffic announce-
ments
TA (traffic announcement standby) lets you
receive traffic announcements automatically, no
matter what source you are listening to. TA can
be activated for both a TP station (a station that
broadcasts traffic information) or another
enhanced network’s TP station (a station carrying
information which cross-references TP stations).
1
Tune in a TP or another enhanced net-
work’s TP station.
When you are tuned in to a TP or another
enhanced network’s TP station the
indicator will light.
2
Press the TA/NEWS button to turn traffic
announcement standby on.
appears in the display. The tuner will
standby for traffic announcements.
If you turned the TA function on while tuned in
to neither a TP nor another enhanced net-
work’s TP station, the
indicator lights.
❒ To turn traffic announcements standby off,
press the TA/NEWS button again.
❒ You can also turn on or off the TA function
by touching [TA] on the screen.
3
Use the VOL (8/2) button to adjust the TA
volume when a traffic announcement
begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press the TA/NEWS button while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but
remains in standby mode until turning the
traffic announcement standby off.
❒
You can also cancel the announcement by
pressing the TRK (4/6) button or the
P.LIST (8/2) button while a traffic
announcement is being received.
❒ The system switches back to the original
source following traffic announcement
reception.
MAN-HD3-SOFTW-EN.book Page 102 Wednesday, January 10, 2007 9:33 AM