Pioneer AVIC-HD3 - Manual (Page 98)

96
Ch
ap
te
r
10
U
si
n
g
t
h
e AV
S
ou
rc
e (B
ui
lt
-i
n DV
D
Dri
ve a
n
d
R
ad
io
)
AV
Notes on playing MP3 disc
❒ When playing discs with MP3 files and audio
data (CD-DA) such as CD-EXTRA and MIXED-
MODE CDs, both types can be played only by
switching mode between MP3 and CD-DA.
When playing back the CD-DA part, the opera-
tion is the same as for normal music CDs.
Likewise, when playing back the MP3 part, the
operation is the same as for MP3. Refer to the
instructions for each type of media.
❒ If you have switched between playback of MP3
files and audio data (CD-DA), playback starts
at the first track on the disc.
❒ Playback is carried out in order of file number.
Folders are skipped if they contain no MP3
files. (For example, if folder 01 (ROOT) con-
tains no MP3 files, playback commences with
folder 02.)
❒ When playing back files recorded as VBR (var-
iable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
❒ If the built-in DVD drive does not operate prop-
erly, an error message may be displayed.
➲ “Built-in DVD drive” ➞ Page 180
Operating the DVD
• For safety reasons, “Video image” cannot
be viewed while your vehicle is in motion.
To view “Video image”, you must stop in a
safe place and put on the handbrake
before setting your route (see page 18 for
details).
You can play a DVD-Video using the built-in DVD
drive of the navigation system. This section
describes operations for DVD-Video.
Selecting [DVD] as the source
1
Press the OPEN CLOSE button and insert
a disc you want to play to disc loading
slot.
The source changes and then playback will
start.
❒
If the disc is already set, touch the source
icon and then touch [DVD].
➲ For details, refer to “Selecting a source” ➞
Page 89
❒ Also see “Handling and Care of the Disc” in
the Hardware Manual and “Detail Information
for Playable Media” in this manual for more
cautions about handling DVD-Video.
Screen configuration
(1) Source icon
Shows which source has been selected.
(2) Sound output indicator
Shows which sound output setting has been
selected.
(1) (4)(6) (5) (7) (3) (8)
(9)
(2)
MAN-HD3-SOFTW-EN.book Page 96 Wednesday, January 10, 2007 9:33 AM