Pioneer AVIC-HD3 - Manual (Page 44)

42
Ch
ap
te
r
3
Ho
w to
Re
ad
t
h
e M
ap
Disp
la
y
NA
V
I
: Overlay POI
Displays icons for surrounding facilities (POI)
on the map.
➲
“Displaying POI on the Map” ➞ Page 46
: Volume
Displays [Volume Setting].
➲
[Volume] ➞ Page 81
: Phone Book
Displays [Phone Book].
➲
“Calling a number in the Phone Book” ➞
Page 75
➲ “Editing the entry in “Phone Book”” ➞
Page 78
: Menu Close
Hides the shortcut menu.
Setting the Vehicle Dynamics
Display
You can change the content of the left and right
meters on the Vehicle Dynamics Display.
Until the sensor’s initial learning is complete,
only the voltage and clock are available.
❒ The speed displayed is a guideline and may
not correspond to the actual speed.
1
Switch to the Vehicle Dynamics Display.
➲
Changing the map display mode ➞
Page 35
2
Touch the left or right meter.
Touch keys are displayed.
3
Touch the items you want to display.
You can select the following items.
[Voltage]:
Displays the power supply and voltage sup-
plied from the battery to this system.
[Acceleration]:
Acceleration in a forward direction is dis-
played. The + sign indicates acceleration
while the – sign indicates deceleration.
[Lateral Acceleration]:
Acceleration in a side direction such as when
turning, is displayed. The + sign indicates a
right turn, while the – sign indicates a left
turn.
[Angular Velocity]:
Displays the vehicle’s turning angle over one
second (how far it has turned in a second).
[Slope]:
Displays the vehicle’s vertical movement. The
+ side represents the rising angle, and the –
side the falling angle.
[Direction]:
Displays the direction your vehicle is travelling
in.
[Clock]:
Current time is displayed.
[Adjust Style]:
Touch [Adjust Style] to display a screen for
selecting the panel pattern. Touch one of the
patterns from among those displayed on
screen to change the panel to the selected pat-
tern.
❒
If you touch [Peak Hold Reset], the maxi-
mum and minimum (green line) values
indicated in [Acceleration] and [Lateral
Acceleration] are reset.
❒ You cannot change the speedometer at the
centre.
❒ Selecting Demo Mode in the Settings
menu enables you to perform a demon-
stration with random values.
MAN-HD3-SOFTW-EN.book Page 42 Wednesday, January 10, 2007 9:33 AM