Pioneer AVIC-HD3 User Manual

Page 176

Advertising
background image

174

Appe

n

d

ix

NA

V

I/

A

V

Slope is not displayed on the

Vehicle Dynamics screen.

Inclination does not move on the 3D

Calibration Status screen.

The speed pulse lead is not con-

nected.

Connect the speed pulse lead.

No sound, no voice.

“Guide Mute” has been set, or sound

volume is reduced to 0.

Adjust the volume of the guidance or

turn “Guide Mute” off.

Refer to “Setting the Volume for

Guidance and Phone” (➞ Page 81).

The estimated time of arrival is differ-

ent from the actual time of arrival.

This phenomenon is normal,

because the estimated time of arrival

is affected by various factors such as

traffic jams or shortcuts.

The estimated time of arrival is an

ideal value calculated based on the

value set for [Average Speed] and

the actual driving speed. The esti-

mated time of arrival is only a refer-

ence value, and does not guarantee

arrival at that time.

The person on the other end of the

phone call cannot hear the conversa-

tion due to an echo.

The voice from the person on the

other end of the phone call is output

from the speakers and then picked

up by the microphone again, creat-

ing an echo.

Use the following methods to reduce

the echo.

– Lower the volume on the receiver

– Have both speakers pause

slightly before speaking

The registered phone cannot be

deleted.

Normally, the registered phone can-

not be deleted.

• Overwrite the old registered phone

with a new phone.

• Clear [Phone Settings] by refer-

ring to “Returning the Navigation

System to the Default or Factory

Settings”.

When the screen is frozen...
Park your vehicle in a safe place, and cut off the engine. Turn the ignition key back to “Acc off”. Then
start the engine again, and turn the power to the navigation system back on. If this does not solve the
problem, press the RESET button on the navigation system.

Symptom

Cause

Action (See)

CD or DVD playback is not possible.

The disc is inserted upside down.

Insert the disc with the label upward.

The disc is dirty.

Clean disc.

The disc is cracked or otherwise

damaged.

Insert a normal, round disc.

The files on the CD are an irregular

file format.

Check the file format.

The CD format cannot be played

back.

Replace disc.

The loaded disc is a type this system

cannot play.

Check what type the disc is. (Also see

“Handling and Care of the Disc” in

the Hardware Manual and “Detail

Information for Playable Media” for

more cautions about handling each

type of media.)

No picture.

The handbrake lead is not connected

or applied.

Connect a handbrake lead correctly,

and apply the handbrake.

Handbrake interlock is activated.

Park your vehicle in a safe place and

apply the handbrake.

Handbrake interlock ➞ Page 18

The [AV Input] setting is incorrect.

Please read the following page and

set the setting correctly.

Page 138

The audio skips.

The navigation system is not firmly

secured.

Secure the navigation system firmly.

Failure hard disk drive.

Consult your Pioneer dealer.

Symptom

Cause

Action (See)

MAN-HD3-SOFTW-EN.book Page 174 Wednesday, January 10, 2007 9:33 AM

Advertising
This manual is related to the following products: