Operating the radio (am), Selecting [am] as the source, Screen configuration – Pioneer AVIC-HD3 User Manual

Page 108: Touch key operation

Advertising
background image

106

Ch

ap

te

r

10

U

si

n

g

t

h

e AV

S

ou

rc

e (B

ui

lt

-i

n DV

D

Dri

ve a

n

d

R

ad

io

)

AV

Operating the Radio (AM)

You can listen to the radio by using the navigation
system. This section describes operations for
Radio (AM).

Selecting [AM] as the source

1

Touch the source icon and touch [AM].

For details, refer to “Selecting a source” ➞
Page 89

Screen configuration

(1) Source icon

Shows which source has been selected.

(2) Preset number indicator

Shows what preset has been selected.

(3) Frequency indicator

Shows to which frequency the tuner is tuned.

(4) Preset list display

Shows the preset list.

(5) LOCAL indicator

Shows when local seek tuning is on.

(6) LW/MW indicator

Shows whether the tuner is tuned for the LW or
MW.

Touch key operation

1

Touch the source icon and then touch
[AM] to select the radio (AM).
When the source icon is not displayed, you
can display it by touching the screen.

Touch keys

(1) Select a desired frequency from the list

Touch to recall the preset frequency.

To register the frequency currently being
received to the preset list, touch and hold the
preset list.

Touch and hold: Store broadcast stations

You can register the frequency currently being
received to the preset list. You can easily store up
to six broadcast frequencies for later recall with
the touch of a key.

Touch to recall the preset frequency.

Up to 6 stations can be stored in memory.

(2) Touch: Perform manual tuning

To perform manual tuning, touch

or

briefly. The frequencies move up or

down one step.

Touch and hold: Perform seek tuning

To perform seek tuning, keep touching

or

for about one second and release.

The tuner will scan the frequencies until a broad-
cast strong enough for good reception is found.

You can cancel seek tuning by touching either

or

briefly.

If you keep touching

or

, you

can skip broadcasting frequencies. Seek tun-
ing starts as soon as you release the keys.

You can also perform these operations by
using the TRK (4/6) button.

(3) Tune in strong signals

“Tuning in strong signals” ➞ Page 107

(1)

(2) (3)

(5)

(4)

(6)

(4)

(2)

(1)

(3)

MAN-HD3-SOFTW-EN.book Page 106 Wednesday, January 10, 2007 9:33 AM

Advertising
This manual is related to the following products: