Pioneer AVIC-X3 - Manual (Page 137)

135
Appe
n
d
ix
NA
V
I/A
V
Problems in the audio screen (during DVD-Video playback)
When the screen is frozen...
Park your vehicle in a safe place, and cut off the engine. Turn the ignition key back to “Acc off”. Then
start the engine again, and turn the power to the navigation system back on. If this does not solve the
problem, press the RESET button on the navigation system.
Symptom Cause Action (See)
Playback is not possible. The disc is dirty. Clean disc.
The loaded disc is a type this unit
cannot play.
Check what type the disc is.
A non-compatible video system disc
is loaded.
Change to a disc compatible to your
video system.
There’s no picture. The handbrake cord is not con-
nected.
Connect the handbrake cord, and
apply the handbrake.
The handbrake is not applied. Connect the handbrake cord, and
apply the handbrake.
The audio and video skip. This unit is not firmly secured. Secure this unit firmly.
Rear display picture disappears. The source disc being listened to in
the navigation system has been
ejected.
Before ejecting the disc, switch the
source. This problem may occur
when certain connection methods
are used.
There was a problem with the rear
display or a faulty wiring connection.
Check the rear display and its con-
nection.
Symptom Cause Action (See)
CD or DVD playback is not possible. The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean disc.
The disc is cracked or otherwise
damaged.
Insert a normal, round disc.
The files on the “CD (DVD)” are an
irregular file format.
Check the file format.
The “CD (DVD)” format cannot be
played back.
Replace disc.
The loaded disc is a type this system
cannot play.
Check what type the disc is. (Also see
“Handling and Care of the Disc” for
more cautions about handling each
type of media.)
No picture. The handbrake lead is not connected
or applied.
Connect a handbrake lead correctly,
and apply the handbrake.
Handbrake interlock is activated. Park your vehicle in a safe place and
apply the handbrake.
➲
“Handbrake interlock” ➞ Page 11
The “AV1 Input” or “AV2 Input” set-
ting is incorrect.
Please read the following page and
set the setting correctly.
➞
Page 115
The audio skips. The navigation system is not firmly
secured.
Secure the navigation system firmly.
“Rear display” picture disappears. There was a problem with the “Rear
display” or a faulty wiring connec-
tion, for example.
Check the “Rear display” and its con-
nection.
“DVD/DivX Setup” is carried out You can not display the video image
to “Rear display” during “DVD/DivX
Setup” menu.
MAN-AVIC-X3-EN.book Page 135 Wednesday, June 6, 2007 10:15 AM