Pioneer AVIC-X3 - Manual (Page 48)

46
Ch
ap
te
r
3
S
et
ti
ng
a
Ro
ut
e to
You
r D
es
ti
n
at
io
n
NA
V
I
Setting Areas to Avoid
If you register Areas to Avoid, such as crowded
intersections or congested areas, routes can be
calculated that avoid those areas.
Registering an area to avoid
This section describes how to register an Area to
Avoid for the first time. You can register up to five
Areas to Avoid.
1
Touch “Route Options” in the NAVI
MENU, then touch “Areas to Avoid”.
2
Touch “Yes”.
3
Select one of the items shown in “New
Area”.
When registering for the first time, any item
on the list is shown as “New Area”.
4
Select the place to register and display
the map.
➲
Searching places to register ➞ Page 39 to
42
Once a search is complete, a map with the
specified location at its centre appears.
5
Change the map scale and decide the size
of the Area to Avoid.
The Area to avoid is enclosed in a red frame.
You can also change the map scale though
the maximum map scale for registering Areas
to Avoid is 100 m (0.1 mile).
6
Scroll the map, adjust the position of the
red frame, and touch “OK”.
If you want to stop registration, touch “Back”.
❒ Depending on the setting of route search con-
ditions, you may not be able to avoid the spec-
ified areas. A confirmation message is
displayed on the screen at this time.
➲ Information on route calculation conditions ➞
Page 49
Changing or deleting an area to
avoid
You can subsequently change/rename/delete an
Area to Avoid.
1
Touch “Route Options” in the NAVI
MENU, then touch “Areas to Avoid”.
2
Select the area you want to change or
delete.
3
Select the desired operation.
Rename:
Changes the name. Enter the new name and
touch “OK”. This returns you to the Route
Options menu.
Change:
A specified area can be changed. For the next
steps, see Step 3 in the “Registering an area
to avoid” above.
Delete:
Delete the selected Area to Avoid.
MAN-AVIC-X3-EN.book Page 46 Wednesday, June 6, 2007 10:15 AM