Pioneer AVIC-X3 - Manual (Page 30)

28
Ch
ap
te
r
1
Ba
sic
Op
er
at
ion
NA
V
I/
A
V
Basic AV Source
This section describes basic AV operations, such
as adjusting the volume, switching the source
and stopping the source, using CD operations as
an example.
Selecting an AV source
1
Press the VOLUME knob (or AV button) to
switch to the AV operation screen.
2
Press the MENU button to change to the
AV MENU.
3
Touch the source icon to select the
desired source in the AV Source screen.
❒ Also, press the VOLUME knob repeatedly
when the AV operation screen is displayed to
switch between sources:
“DISC” [CD, ROM, DVD-V, DivX] (built-in DVD
drive) – “RADIO” (tuner) – “iPod” (iPod) –
“USB” (USB) – “BT-TEL” (Bluetooth Tele-
phone) – “BT-AUDIO” (Bluetooth Audio) –
“M-CD” (multi-CD player) – “M-DVD” (multi-
DVD player) – “AV-1” (video input1) – “AV-2”
(video input2) – “EXT-1” (external unit 1) –
“EXT-2” (external unit 2) – “OFF” (source off)
❒ Touch “OFF” to switch the source to OFF.
❒ Touch “REAR SCREEN” to select the source
for Rear display.
➲ “Selecting the video for “Rear display”” ➞
Page 114
❒ Sources that are not connected to the naviga-
tion system, sources that are busy reading a
disc or magazine, and sources with incom-
plete settings cannot be used.
❒ The term “external unit” refers to a Pioneer
product (such as one available in the future)
that, although incompatible as a source, ena-
bles control of basic functions by the naviga-
tion system. Two external units can be
controlled by the navigation system. When
two external units are connected, the naviga-
tion system allocates them to external unit 1
or external unit 2.
❒ When the “Antenna Control” mode is set to
“Radio”, the vehicle’s aerial can be stowed or
turned off by following the instructions below.
– Change the source from radio (AM or FM) to
another source.
– Turn the source off.
– Turn off the ignition switch (ACC OFF).
If the “Antenna Control” mode is set to
“Power”, the vehicle’s aerial can be stowed or
turned off only when the ACC is set to “OFF”.
➲ “Antenna Control” ➞ Page 116
Adjusting the volume
1
Use the VOLUME knob to adjust the audio
sound level.
Rotate the VOLUME knob to increase or
decrease the volume.
❒
To adjust the navigation volume (voice
guidance), access “Volume” in the NAVI
MENU.
➲ Navigation volume adjustment ➞ Page 63
Turning the source off
1
Press the VOLUME knob (or AV button) to
switch to the AV operation screen.
2
Press the MENU button to change to the
AV MENU.
3
Touch “OFF” in the AV Source screen.
❒ Press and hold the VOLUME knob to switch
the source to mute.
MAN-AVIC-X3-EN.book Page 28 Wednesday, June 6, 2007 10:15 AM