Pioneer AVIC-X3 - Manual (Page 20)

18
DVD Map Discs for Your Navigation System
Configuration of data recorded on discs
The map for this navigation system is supplied on two discs: one for the west and the other for the east.
Please set the disc to use according to your destination or current location.
The areas recorded on each disc are as follows:
❒ Removing the disc and inserting another disc causes the navigation system to automatically restart
and reload the new route. (This automatic “Reroute” operation cannot be cancelled.)
Initial Use
If the initial learning is not complete, following screen appears.
1
If a message appears, touch “OK”.
When the navigation system begins running for the first time, the 3D Hybrid Sensor automatically
begins initial learning. Positioning is performed solely by GPS satellites until the 3D Hybrid Sensor
initial learning is complete, so the location of your vehicle may not be very accurate. This is not an
error. When the initial learning is complete, the location of your vehicle can be detected with high
accuracy.
❒
“Shop Demo” is the demonstration used in a store. Do not touch “Shop Demo”.
➲ If an error message appears during initial learning ➞ Page 137
West area disc East area disc
MAN-AVIC-X3-EN.book Page 18 Wednesday, June 6, 2007 10:15 AM