Pioneer KRP-500M - Manual (Page 18)

18
En
02 Install Your Flat Panel Display
Follow the steps below to secure your flat panel display.
1 ) Mark locations for metal fittings and screws on the back edge of the table using the panel stand to determine
placement.
2 ) Drill holes in the table or platform edge at the marked locations.
3 ) Lift panel into place with the assistance with at least one other person.
4 ) Use wood screws (not included) to secure the metal fittings to the table.
(KRP-600M)
20 mm
8
mm to 15
m
m
4 m
m
Falling prevention
metal fitting
(supplied with the
optional stand)
Wood screw
(commercially
available,
4 mm x 20 mm
KRP-600M_500M.book Page 18 Tuesday, May 13, 2008 12:47 PM