Basic picture and sound adjustment 04 – Pioneer KRP-500M User Manual
Page 33
33
En
Basic Picture and Sound Adjustment
04
Englis
h
4.2.4
Turn On the Image Orbiter
A built-in feature to protect against burn-in is the Orbiter function. Orbiter slightly changes the position of the
picture while the image is on screen.
To activate Orbiter, follow the steps below.
1 ) Access
Orbiter through the Option menu.
2 ) Select
Mode 1, Mode 2 or Off.
• AV source Mode 1: for any screen mode except Dot by Dot
• AV source Mode 2: for all available screen modes
• PC source Mode 1: to enable Orbiter
• PC source Mode 2: to smooth the text/character appearance
3 ) Press
HOME MENU to exit the menu.
Note:
The farthest edges of an image may be hidden at times as the picture position shifts. Also, when the Orbiter
function is set to Mode 1
or Mode 2, the image may appear to drop slightly on the screen.
4.2.5
Trigger the Screen-Saving Video Pattern Periodically
The Video Pattern function causes the screen to appear white, which helps to alleviate after-image ghosts or burn-
in. While the Video Pattern screen is on, only the remote’s
MONITOR (a) button and the panel’s STANDBY/ON
button are available. The panel automatically switches to Standby one hour after running the Video Pattern
screen. To cancel the Video Pattern screen, press the remote’s
MONITOR (a) or press the panel’s STANDBY/ON
button.
To activate the Video Pattern screen, follow the steps below.
1 ) Access
Video Pattern through the Option menu.
A confirmation screen appears.
2 ) Select
Start from the submenu.
The Video Pattern screen appears.
3 ) Leave the panel alone for a minimum of one hour.
Note:
The Video Pattern timer has priority over Sleep Timer, No Signal Off, and No Operation Off (Power
Management) settings.
4.2.6
Activate Energy Save to Reduce Power Usage
The Energy Save option decreases picture brightness and lowers power consumption. The recommended setting,
Save 1, extends the life of your panel while keeping power usage at a minimum.
Follow the steps below to activate an Energy Save option.
1 ) Access
Energy Save through the Power Control menu.
2 ) Select an option from the Energy Save submenu.
3 ) Press
HOME MENU to exit the menu.
Note:
To deactivate the screen, select Picture Off.
Option
Description
Standard
No effect
Save 1
consumes less power than Standard
Save 2
consumes less power than Save 1
Picture Off
activates Picture Off when closing the Home Menu
with this option selected
KRP-600M_500M.book Page 33 Tuesday, May 13, 2008 12:47 PM