Pioneer KRP-500M - Manual (Page 41)

41
En
05 Additional Picture Adjustment Options
Englis
h
Lighten Side Masks
If content appears with bars (side masks) on each side of a picture when the screen size is 4:3 and Side Mask
Detection is active, the bars automatically change from black to gray. However, the gray is fairly dark. To change
the bars to a lighter shade of gray, follow the steps below.
1 ) Access Side Mask through the Screen menu.
2 ) Select Brightness Sync. from the submenu.
3 ) Select the desired parameter.
4 ) Press HOME MENU to exit the menu.
Restore Default Screen
To restore the factory default screen settings, follow the directions below.
1 ) Access Reset through the Screen menu.
2 ) Press ENTER to continue with the screen reset.
3 ) Use the arrow buttons to highlight Yes.
4 ) Press ENTER.
All screen settings return to the original default values.
5.3.2 Select a Color Temperature Level
Use this option to adjust the color temperature for a better white balance. To adjust the white balance, follow the
directions below.
1 ) Access Color Temp through the Picture menu.
2 ) Select the desired parameter from the submenu.
To manually adjust the white balance, continue with the following Steps.
3 ) Select Manual in Step 2.
4 ) Press ENTER to confirm.
5 ) Use the right arrow button to adjust the balance.
The manual adjustment screen appears.
Parameter Description
Fixed sets the same brightness for gray side masks
Auto adjusts the side mask brightness according to the
brightness of screen images
Parameter Description
High white with bluish tone
Mid-High intermediate tone between High and Mid
Mid natural tone
Mid-Low intermediate tone between Mid and Low
Low white with reddish tone
Manual adjusts to your preference
KRP-600M_500M.book Page 41 Tuesday, May 13, 2008 12:47 PM