Pioneer KRP-500M - Manual (Page 7)

7
En
01 Introduction to the Flat Panel Displays
Englis
h
1.2 Control Options: Get to Know Your Flat Panel Display
You can operate your flat panel display from the panel buttons or with the remote control. The following sections
provide button locations/operations for the panel and the remote control.
1.2.1 Control Buttons and More on the Flat Panel Display
Your flat panel display has buttons, indicators, and sensors on the lower front bezel with more buttons on the rear
panel. Refer to the drawings below for specific locations and functions. Or, to identify back ports and terminals
only, check the terminal position sheet located near the panel’s terminal compartment.
KRP-600M/KRP-500M: Face of Panel
1 - Power On ( ) button
2 - Power On indicator
3 - STANDBY indicator
4 - Room Light sensor
5 - Remote Control sensor
6 - Volume Up/Down buttons
7 - INPUT button
8 - STANDBY/ON button
1
6
7
8
5 4 2 3 6 7 8
Left side Right side (KRP-600M) Right side
Bottom
Front
Viewed from
the rear of
the panel
(KRP-500M)
KRP-600M_500M.book Page 7 Tuesday, May 13, 2008 12:47 PM