Pioneer CU-RF100-U - Manual (Page 18)

Controlling the rest of your system 03
18
En
Similar to multi operations, System Off allows
you to use one button to stop and switch off a
series of components in your system at the
same time. 1
Programming a multi-operation or a
shutdown sequence
Set the remote control operation mode selector
switch to
RECEIVER when you want to program
this receiver’s operations, to SOURCE when you
want to program operations of other components.
1 While pressing MULTI OPERATION, press
HOME MENU.
The remote display shows
SETUP MENU.
2 Use
/ to select ‘MULTI OPERATE’ or
‘SYSTEM OFF’ from the menu and press
ENTER.
If you selected Multi Operation (
MULTI
OPERATE), the remote display prompts you for
an input function button.
If you selected System Off ( SYSTEM OFF), go to
step 4.
3 Press the input function button for the
component that will start the multi-
operation, then press ENTER.
For example, if you want to start the sequence
by switching on your DVD player, press
DVD.
4 Use
/ to select ‘EDIT CODE’, then
press ENTER.
To erase any previously stored multi-operations
(or shutdown sequences) select
CLEAR CODE
above.
5 Use / to select a command in the
sequence, then press ENTER.
If this is the first command in the sequence,
select
1ST CODE. Otherwise, simply choose
the next command in the sequence. PRESS
KEY flashes after you press ENTER.
6 If necessary, press the input function
button for the component whose command
you want to input.
This is only necessary if the command is for a
new component (input function).
7 Select the button for the command you
want to input.
The following remote control commands can
be selected:
• You don’t need to program the receiver to
switch on or off. This is done automatically.
With Pioneer components, you don’t need to:
• program the power to switch off in a
shutdown sequence (except DVD
recorders);
These take priority in multi operations (not
shutdown).
Note
1 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other
components (see Setting the remote to control other components on page 13 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
• Up to 5 commands can be programmed for System Off.
DVD
RECEIVER SOURCE MAIN
MULTI
OPERATION
AUDIO
PARAMETER
VIDEO
PARAMETER
ZONE2
SOURCE
TV RECEIVER
3
iPod
USB OPTION
MULTI CH
ADAPTER
NET RADIO
INPUT SELECT LIGHT
CD
PHONO
AUX
INPUT MUTE MUTE
VOL
VOL
TV CONTROL
CH
VIDEO CD-R IN
TUNER
HMG
BD
TV
HDMI DVR
BDR
1 2
AUDIO
PARAMETER
TOP MENU
BAND
iPod CTRL PTY SEARCH
CATEGORY
LIST TOOLS
HOME
MENU
STATUS
THX PQLS MPX MEMORY
PHASE CTRL CH LEVEL
T.EDIT
GUIDE
VIDEO
PARAMETER
INPUT MUTE
TUNE
TUNE
PRESET PRESET
MUTE
PGM MENU
TV CONTROL
STEREO
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT
CLR
SBch MCACC
HDMI OUT
D.ACCESS
ENTER
CLASS
DISP
CH
AUTO/ALC/
DIRECT STANDARD ADV SURR
ENTER
RETURN
CU-RF100.book Page 18 Wednesday, March 17, 2010 6:13 PM