Pioneer AVH-P6400CD - Manual (Page 14)

En 14
02
Section
• The adjusted angle of the display will be mem-
orized and automatically returned to the next
time the display is deployed.
Selecting a source
You can select a source you want to listen to. To
switch to the built-in CD player, load a disc in
this product (AVH-P6400CD only) (refer to page
28).
Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD player (AVH-P6400CD)— TV —
VIDEO — Tuner — DAB (Digital Audio
Broadcasting)— DVD (one disc only/multi-DVD
player)— Multi-CD player — External unit 1 —
External unit 2 — AUX
Notes
• In the following cases, the sound source will
not change:
— When a product corresponding to each
source is not connected to this product.
— When no disc is set in this product (AVH-
P6400CD only).
— When no magazine is set in the multi-CD
player.
— When no magazine is set in the multi-DVD
player.
— When the AUX (auxiliary input) is set to off
(refer to page 64).
• External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this product. Two external
units can be controlled by this product. When
two external units are connected, the alloca-
tion of them to external unit 1 or external unit
2 is automatically set by this product.
• When this product’s blue/white lead is con-
nected to the car’s auto-antenna relay control
terminal, the car’s antenna extends when this
product’s source is switched on. To retract the
antenna, switch the source off.
Turning the unit off
Press SOURCE and hold for at least one sec-
ond to turn the unit off.
Power ON/OFF