Pioneer AVH-P6400CD - Manual (Page 23)

En 23
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
06
Section
RDS
Selecting alternative frequencies
If you are listening to a broadcast and the recep-
tion becomes weak or there are other problems,
the unit will automatically search for a different
station in the same network which is broadcast-
ing a stronger signal.
• AF is on as a default.
1 Press
5 or ∞ to select
AF from the TUNER
MENU, and press A.MENU .
AF adjustment indications are displayed.
2 Press
5 to turn
AF on.
Press
5 and
AF :ON is displayed.
3 Press
∞ to turn
AF off.
Press
∞ and
AF :OFF is displayed.
Notes
• Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
• When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station’s AF list. (This is
only available when using presets on the
FM1
or FM2 band.) No preset number appears on
the display if the RDS data for the station
received differs from that for the originally
stored station.
• Sound may be temporarily interrupted by
another program during a AF frequency
search.
• When the tuner is tuned to a non-RDS station
the AF indicator flashes.
• AF can be switched on or off independently
for each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station with
the same programming. During the search,
PI
Seek is displayed and the output is muted. The
muting is discontinued after completion of the
PI seek, whether or not a different station is
found.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can be
set to perform PI Seek during preset recall.
• The default setting for Auto PI Seek is off. See
Switching Auto PI Seek on page 64.
Limiting stations to regional program-
ming
When AF is used to automatically retune fre-
quencies, the regional function limits the selec-
tion to stations broadcasting regional
programs.
1 Press
5 or ∞ to select
REGIONAL from the
TUNER MENU, and press A.MENU .
REGIONAL adjustment indications are
displayed.
2 Press
5 to turn the regional function on.
Press
5 and
Regional :ON is displayed.
3 Press
∞ to turn the regional function off.
Press
∞ and
Regional :OFF is displayed.
Notes
• Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).