Pioneer AVH-P6400CD - Manual (Page 67)

En 67
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
14
Section
Other Functions
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner’s manual.
Selecting AUX as the source
Press SOURCE to select AUX as the source.
Press SOURCE until AUX appears in the display.
• If the auxiliary setting is not switched on, AUX
cannot be selected. For more details, see
Switching the auxiliary setting on page 64.
Setting the AUX title
The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the source,
press A.MENU and the AUX SOURCE MENU is
displayed.
2 Press
5 or ∞ to select
AUX , and press
A.MENU .
AUX MENU is displayed.
3 Press
5 or ∞ to select
NAME EDIT , and
press A.MENU .
NAME EDIT adjustment indications are dis-
played.
4 Press A.MENU to select the desired charac-
ter type.
Press
A.MENU repeatedly to switch between the
following character type:
Alphabet (Upper case), Numbers and Symbols —
Alphabet (Lower case)— European letters , such
as those with accents (e.g. б, а, д, з)
5 Press
5 or ∞ to select a letter of the alpha-
bet.
Each press of
5 will display a letter of the alpha-
bet in A B C ... X Y Z , numbers and symbols in 1 2
3 ... @ # < order. Each press of
∞ will display a
letter in the reverse order, such as Z Y X ... C B A
order.
6 Press
3 to move the cursor to the next
character position.
When the letter you want is displayed, press
3
to move the cursor to the next position and then
select the next letter. Press
2 to move back-
wards in the display.
7 Move the cursor to the last position by
pressing
3 after entering the title.
When you press
3 one more time, the entered
title is stored in memory.
8 Press BAND/ESC to return to the playback
display.