Pioneer AVH-P6400CD - Manual (Page 20)

En 20
05
Section
Tuner
Introduction of advanced tuner
operation
1
FUNCTION display
Shows the function status.
1 Press A.MENU when TUNER source indica-
tions are displayed.
MENU is displayed.
2 Select TUNER and press A.MENU .
TUNER MENU indications are displayed as
follows:
BSM (best stations memory)
REGIONAL (regional)
LOCAL (local seek tuning)
PTY (program type selection)
TA (traffic announcement standby)
AF (alternative frequencies search)
NEWS (news program interruption)
P.CH MEMORY (preset channel memory)
• Select BACK in the MENU display or press
BACK to return to the previous display.
Pressing WIDE on the head unit returns you to
the previous display.
• To return to the frequency display, press both
BAND/ESC and DISP .
• If MW/LW band is selected, you can only
select
BSM , LOCAL and P.CH MEMORY .
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
Storing broadcast frequencies
You can easily store up to six broadcast frequen-
cies for later recall with
5 or ∞.
1 Press
5 or ∞ to select
P.CH MEMORY from
the TUNER MENU, and press A.MENU .
P.CH MEMORY adjustment indications are dis-
played.
2 Adjust frequency with
2 or 3.
If you continue pressing
2 or 3, a strong broad-
cast frequency is automatically searched for,
and search ends when it is found.
3 Select a preset channel number with
5 or
∞ and press
A.MENU to preset that frequency.
4 If you want to preset frequencies one after
another, use
5 or ∞ to move to the next preset
channel you want to use to store a frequency,
and perform the same operation.
When you have finished, press
BAND/ESC to
return to the source display.
The number you have pressed will flash in the
PRESET NUMBER indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
You can use
5 and ∞ to recall radio station
frequencies assigned to P1-6 (P.CH MEMORY).
1