Pioneer AVH-P6400CD - Manual (Page 63)

En 63
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
13
Section
Initial Settings
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for this unit.
1
FUNCTION display
Shows the function status.
You cannot select AUDIO MENU from the OFF
SOURCE MENU.
1 Press SOURCE and hold until the unit turns
off.
2 Press A.MENU and the OFF SOURCE
MENU is displayed.
3 Press
5 or ∞ to select
INIT , and press
A.MENU .
FM STEP (FM tuning step)
DAB PRIORITY (Priority function)
RDS AUTO PI (Auto PI seek)
DETACH WARNING (Warning tone)
AUX (Auxiliary)
ILLUMINATION (Illumination color)
REAR SP (Rear output and subwoofer)
TEL MUTE/ATT (Telephone muting)
You can operate a desired function. For details,
refer to the pages for each of the functions.
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND/ESC or
WIDE on the remote control.
Setting the FM tuning step
Normally the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on the tuning
step automatically changes to 100 kHz. It may
be preferable to set the tuning step to 50 kHz
when AF is on.
1 Press
5 or ∞ to select
FM STEP from the
INIT MENU, and press A.MENU .
FM STEP adjustment indications are displayed.
2 Select the FM tuning step with
2/3.
Pressing
2/3 will switch the FM tuning step
between 50 kHz and 100 kHz while AF or TA is
on. The selected FM tuning step will appear in
the display.
Note
• The tuning step remains at 50 kHz during
manual tuning.
Setting the DAB Priority
Function
When a hide-away DAB tuner (GEX-P700DAB) is
connected, you can set the product in this mode
so that the interruption of traffic information
from the hide-away DAB tuner takes
precedence over this product’s RDS traffic
announcement function.
1