Pioneer AVH-P6400CD - Manual (Page 57)

Audio Adjustments
En 57
Introduction of audio
adjustments
The display for this MENU is the same regard-
less of which source you operate from.
1 AUDIO display
Shows the audio adjustments status.
1 Press A.MENU in each source display.
MENU is displayed.
2 Press
5 or ∞ to select
AUDIO , and press
A.MENU .
The AUDIO MENU is displayed as follows:
FAD/BAL (fader/balance adjustment)— EQ
MENU (equalizer curve adjustment)— BASS
(bass)— TREBLE (treble)— LOUDNESS (loud-
ness)— SUB WOOFER (subwoofer)— NON FAD-
ING (non fading)— HPF (high pass filter)— SLA
(source level adjustment)
You can operate a desired function. For details,
refer to the pages for each of the functions.
NON FADING is only displayed when S.W
CTRL:EXTERNAL is set in INIT MENU. (SUB
WOOFER is not displayed.)
• When the subwoofer controller setting is S.W
CTRL:EXTERNAL or REAR SP: S.W , you cannot
switch the SUB WOOFER . (Refer to page 61.)
• When the subwoofer controller setting is only
S.W CTRL:EXTERNAL , you can switch the non
fading output on/off mode. (Refer to page 61.)
• When selecting the FM tuner as the source,
you cannot switch to
SLA .
• Select BACK in the MENU display or press
BACK to return to the previous display.
Pressing WIDE on the head unit returns you to
the previous display.
• To return to the playback display, press
BAND/ESC or WIDE on the remote control.
• When the setting is REAR SP: S.W , FAD/BAL
indications are for BAL .
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
English
Espa
ñ
ol
Deutsch
F
ran
ç
ais
Italiano
Nederlands
12
Section
1